Werbung
Verfügbare Sprachen
Verfügbare Sprachen
- After the brush has been used for a long time, bristles might start to tangle with hair and
other particles. Clean it in order for it to operate correctly again.
Cleaning the Jalisco brush and the Best Friend Care brush
- Move the rotary brush release button with the finger toward the arrow and remove the
cover of one of the ends of the brush.
- Take one end of the brush out as shown on the image.
- It is important to clear and clean all the residues left in the brush's rotary axis.
- After washing and drying all the parts, assemble it back in order to use the brush again.
Fig. 22
How to remove the battery
Press the battery release button and take the battery out as shown on the image. Store the
battery in a plastic bag and leave it in a dry place.
Fig. 23
Storing the device
- If the robot is not going to be used for a long time, remove the battery from the product and
store it in a dry and safe place.
Maintenance indicator
- The full tank icon or the obstructed filter icon will be displayed if the device has not been
properly and frequently maintained.
Fig. 24
6. WET SCRUBBING ACCESSORY
- When the vacuum cleaner is not going to be used for a long time, please remove the
water tank and empty the remaining water. Do not expose it to direct sunlight or to damp
environments.
Mop installation/removal
Removing/installing the water tank
Fig. 27
- To install/remove the cleaning cloth you must first disassemble the water tank from the
rest of the appliance.
- In order to remove the water tank, use your foot to hold it against the ground and pull
upward until it unclicks from position.
- Once the cloth has been installed and the water tank has been filled, to
reinstall the water tank, simply push it back together until it clicks into position.
CONGA ROCKSTAR 1500 ULTIMATE-ERGOWET
ENGLISH
47
Werbung
