Cochlear Baha Benutzerhandbuch Seite 3

Welcome
Congratulations on getting your new Baha
tips and advice on how to best use and care for your Cochlear
System. It is a complement to the sound processor manual part A and does not
replace it.
Introduction
This guide includes instructions on:
• connecting your sound processor to an
abutment
• care, cleaning and maintenance
• using accessories
• important information & troubleshooting
Note on figures: The figures included on the
front cover correspond to sections of information
in this manual which is general for all Baha sound
processors. Please reference the appropriate figure
when reading. The sound processor images shown
are representative only and not to scale. The
appearance of the sound processor included in
your kit may vary.
All manuals and user guides at all-guides.com
sound processor. This manual provides
®
Connecting your sound
processor
See figure
Use the tilt technique to safely and comfortably
connect and disconnect your sound processor,
from the abutment.
1
2
3
4
Handling your sound
processor
See figure
Once you are familiar with your processor, you can
change the program and the volume level while
the sound processor is attached to the abutment.
Make sure you support the processor from the
bottom with your thumb as you press the buttons
with your index finger.
Baha Connect
™ ®
1
Move hair from the abutment.
Hold the sound processor with the buttons
positioned upwards, tilt it and gently snap it
into place.
To release, place one finger under the sound
processor and gently tilt until it releases.
To avoid feedback (whistling), ensure that the
sound processor is not touching any other
items, such as glasses or a hat.
2
English
3