Werbung
Verfügbare Sprachen
Verfügbare Sprachen
18
8.3 Changing the filter element
The filter element must be replaced in accordance with DIN EN 806-5 when the water flow is
reduced, but at the latest every 6 months, in order to ensure proper operation.
close the shut-off according to chapter 8.1
/
relieve the pressure by opening a tap downstream of the
/
filter, remove a small amount of water and close it again
position a suitable collection container, such as a bucket,
/
under the candle filter
Fig. 8.5: Turn the cover [a] in the direction of the arrow,
/
loosen completely and remove together with the month
ring [b]
Fig. 8.5
Insert the maintenance nut [c] included in the scope
/
of delivery into the filter as shown in Fig. 8.6
according to Fig. 8.7 / Fig. 8.8, put the maintenance
/
nut [c] included in the scope of delivery over the
filter cap [d] in such a way that the rib contours of
both parts interlock [e].
Fig. 8.8
[b]
[a]
[d]
[e]
[c]
[c]
Fig. 8.6
Fig. 8.7
Werbung
