Sensors
The security system is most effective when the sensors are well positioned. Determine which sites you
would like to monitor and where to place the sensors. We recommend placing the control panel near
the front door. The magnetic sensor is designed to be mounted on windows, doors or French windows.
Motion sensors should ideally be placed in the corner to cover the entire space. Place the smoke de-
tector on the ceiling and the running water detector in the kitchen or bathroom near the sink or bath.
PIR Motion Sensor
The PIR sensor is a pet immune motion detector. This mean that pets will not trigger the alarm when
you are not home and the security system is armed.
Product Layout
Motion Sensors
LED
1. Motion Sensors
2. LED
3. Wall Mount
LED
Continuous blinking: motion sensor is performing auto-testing
One blink: motion is detected
Two blinks: three-minute test is complete, sensor will go into sleep mode
Blinking every 3 secs: low battery warning
NOTE: If the battery is running low, the device will send an SMS alert.
12