Remote Control; Product Layout; Arm; Disarm - LAMAX TECH Shield Handbuch

Remote Control

Product Layout

UNLOCK

Arm

To arm the alarm, press the "LOCK" button on the remote control. The LED lights up and you will hear
a beep. The alarm is now armed.

Disarm

To disarm the alarm, press the "UNLOCK" button on the remote control. The LED lights up and you will
hear a beep. The alarm is now disarmed.

Stay Mode

To activate stay mode, press the "HOME" button on the remote control. All sensors in the normal group
will be armed. All sensors in the home group will be disarmed.

Silent Mode

To activate silent mode, press and hold the "HOME" button on the remote control for one second and
then press the "LOCK/UNLOCK" button for three seconds. The security system silent mode is activated/
deactivated. The system can now be controlled without disturbing the neighbours.

Emergency Calls

Pressing the "SOS" button on the remote control immediately triggers an alarm, irrespective of
whether the security system is armed or not.

Connecting a New Remote Control

To pair a remote control, enter the password into the control panel and press the "RECORD" button.
The button will light up. Then press any button on the remote control and it will beep. The remote con-
trol is now paired. If you hear the control panel beep twice, the remote control has already been paired.

RFID Tags

RFID tags are used to disarm the security system. Disarm by placing the RFID tag on the reader.

Adding New RFID Tags

To pair a new RFID tag, enter the password into the control panel and press the "RECORD" button.
The button will light up. Now hold the RFID tag near the reader on the control panel. When you hear a
beep the RFID tag is paired. If the control panel beeps twice, it means the tag has already been paired.
IMPORTANT: RFID tags only work when the control panel is connected to the mains.
SOS
LED
HOME
LOCK
11