Sansui SR-626 Betriebsanleitung Seite 5

PRECAUTIONS
Avoid exposing the turntable (as well as your amplifier and other
audio equipment) to rain or direct sunlight redundant.
Avoid exposing the turntable to dust, excessively warm or cold
temperatures.
Place your turntable on a solid, vibration-free surface.
Avoid placing your turntable on an inclined surface, otherwise in-
correct stylus tracking will deteriorate overall performance. See
that the surface of a record, when placed upon the platter, is
strictly horizontal.
The surface of the cabinet is treated by a special process. When
cleaning it, use a soft cloth. When the surface is excessively dirty,
clean it gently with cloth moistened with a diluted detergent and
water solution.
Avoid subjecting the stylus and tonearm to unreasonable stress. The
tonearm of your turntable should be handled with special care, for
it is more loosely mounted than conventional tonearms, adopting a
knife-edge support system for faithful groove tracing of its stylus.
v e r voltage changeover
Your turntable is adjusted in our factory to operate on the power
voltage of the area where you purchased it. |f you should move to an
area where the voltage is different from the factory-adjusted one, it will
be necessary to make the voltage changeover. See "SIMPLE MAIN-
TENANCE HINTS" for the procedures.