Inhaltsverzeichnis
Werbung
S| eed change
1. Turn the speed selector lever for 33 or 45, depending: on the aes
of the record you are about to play.
2. You
can
fine-adjust
the
speed
with
your
unit.
Refer
to the
explanation of the four rows of strobo markings on the periphery of
the platter in the accompanying
photograph.
Observe the strobo
marking pattern corresponding
to the speed of the record
(33 or
45rpm)
and the power supply frequency
(50Hz or 60Hz) of your
area, and turn the fine speed adjustment control (33 or 45rpm) until
the related strobo marking pattern appears to be stationary.
Bouton
de réglage fin de vitesse a 45 t/mn
Feinregler fiir 45 U/min.
45rpm
fine speed adj. control
Bouton de réglage fin de vitesse a 33 t/mn
Feinregler fur 33 U/min.
33rpm
fine speed adj. control
Place the fecal of your choice on the platter first ana chen iadetiake
ae
Bes
the following operations.
33 t/mn, 50 Hz
33 U/min.,
50 Hz
1. Turn the speed selector lever for 33 or 45, depending on the speed
33rpm, 502
of the record you are about to play. Then the platter starts rotating.
2. Remove the tonearm from its rest and move it so that the stylus is
directly above the selection on the record you wish to hear.
3. Pull the arm lifter lever gently toward you. Then the tonearm will
descend on the platter surface and start play.
4. Adjust the controls on your amplifier or receiver to obtain the tone
and volume to your taste.
33 t/mn, 60 Hz
33 U/min., 60 Hz
33rpm, 60Hz
45 t/mn, 50 Hz
45 U/min.,
50 Hz
45rpm,
50Hz
45 t'mn, 60 Hz
Stroboscope
45 U'min., 60 Hz
topping record play
To skip a portion in the record on the platter, pull the: arm lifter leva
move the tonearm
to the portion you want to play and then pull the
arm
lifter lever. To stop record play, pull the arm lifter lever, return the
tonearm
to
its rest and
turn
the speed
selector
lever to the OFF
position,
Levier de léve-bras acoustique
Armheberhebel
Arm lifter lever
Werbung
Inhaltsverzeichnis
