Endress+Hauser Memosens COS81D Bedienungsanleitung Seite 15

Memosens COS81D
Product
COS81D-****1*
Hazardous area versions
For operation in FDA processes, another FDA-approved seal must be installed before the
process seal (for example CPA442). Doing so will sufficiently separate the process from
the Ex connection.
9.2.2 Material test certificate
A test certificate 3.1 in accordance with EN10204 is supplied depending on the version (→
Product Configurator on the product page).
9.2.3 EHEDG
Compliance with EHEDG' s criteria for hygienic design
• Technical University of Munich, Research Center for Brewing and Food Quality, Freising-
Weihenstephan
• Certificate type: Type EL Class I
10 Installation
10.1 Installation conditions
10.1.1 Orientation
COS81D-****C (c-shaped)
The sensor can be installed in any position (0 to 360 °).
Endress+Hauser
FDA certificate for
Fluorescence layer, O-rings, process seal
Installation
15