Endress+Hauser Memosens COS81D Bedienungsanleitung Seite 14

Certificates and approvals
Electromagnetic compatibility
• The product has been tested for electromagnetic compatibility in accordance with the
applicable European standards for industrial applications.
• The electromagnetic compatibility indicated applies only to a product that has been
connected in accordance with these Operating Instructions.
8.4 Operational safety
1. Before commissioning the entire measuring point, verify that all connections are
correct. Ensure that electrical cables and hose connections are undamaged.
2. Do not operate damaged products, and safeguard them to ensure that they are not
operated inadvertently. Label the damaged product as defective.
3. If faults cannot be rectified:
Take the products out of operation and safeguard them to ensure that they are not
operated inadvertently.
NOTICE
Non-designated use
Incorrect measurements, malfunctions and even measuring point failure could result
‣
Only use the product in accordance with the product specifications.
‣
Pay particular attention to the technical data on the nameplate.
8.5 Product safety
The product is designed to meet state-of-the-art safety requirements, has been tested, and
left the factory in a condition in which it is safe to operate. The relevant regulations and
European standards have been observed.
9 Certificates and approvals
9.1 Declaration of Conformity
The product meets the requirements of the harmonized European standards. As such, it
complies with the legal specifications of the EU directives. The manufacturer confirms
successful testing of the product by affixing to it the  mark.
9.2 Material certificates
9.2.1 Manufacturer declaration of FDA compatibility
The manufacturer declares the use of FDA-listed materials.
14
Memosens COS81D
Endress+Hauser