Herunterladen Diese Seite drucken

Vitek VT-1606 VT Die Betriebsanweisung Seite 4

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 6
CHOPPER
Description of the unit
1. Lid
2. Knife for chopping
3. Cup
4. On/Off button
5. Base
6. Housing
Safety measures
When using electrical devices, you
must observe the following safety
measures:
1. Read the whole set of instructions
before using the mini-processor.
2. To avoid electric shock, do not sub-
merge the housing of the processor
in water or other liquid.
3. Unplug the unit when you are not
using it and before assembling, dis-
sembling or cleaning it.
4. Before turning the unit on, make
sure that the lid is firmly in place.
5. Do not use the unit without the lid.
6. You can dissemble the unit only
after the motor has come to a full
stop.
7. Do not use the unit with a damaged
power cord, plug or other compo-
nent. If the unit is damaged, take it
to a service center for checking and
repair.
8. Do not use the unit out-of-doors.
9. Do not leave a working mini-proc-
essor unattended.
10. Use only the items included in the
set.
11. Be careful when handling the sharp
knives of the mini-processor.
12. Make sure that the cord does not
catch on the corner of the table or
touch a hot surface.
1606.indd 3
1606.indd 3
How to use the mini-processor
This mini-processor can be used to
chop and puree meat, vegetables,
or nuts, such as in the preparation of
baby food, etc.
Before using the unit, remove all the
packaging material, wash the unit in
soapy water and thoroughly wipe the
cup, lid, and knife blades. The acces-
sories can be washed in a dishwasher.
1. Place the processor on a firm and
dry surface.
2. Fasten the cup on the stand by turn-
ing it clockwise.
3. Push the attachment with the knives
down onto the dowel of the cup un-
til it stops.
4. Place food products in the cup.
5. Fasten the lid onto the cup by turn-
ing it clockwise until it snaps into
place.
Note: the mini-processor will not
work if the lid is not closed properly
or if the cup is incorrectly fastened.
6. Plug the power cord into a power
outlet.
7. Press and hold the On/Off button.
To switch it to the second speed,
press it harder.
8. Before removing the lid from the
cup, press the On/Off button and
wait until the knives come to a full
stop.
9. Unplug the unit from the power out-
let.
10. Remove the attachment with knives
from the cup before removing its
contents.
3
3
ENGLISH
10.12.2010 15:36:39
10.12.2010 15:36:39

Werbung

loading