Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8. Activate repeater function on radio transmittor
This function is required to reach shadings outside the range of the radio trans-
mittor. The radio signal is repeated by the shading.
1. Select the 'Menu' function
2.
press and hold = confirm selection
3.
press briefly – selection of repeater function
= a) shadings up to 06/13*
© ª ª ©
= b) no repeater function
© £ £ ©
= c) radio signal is repeated by all
© § £ ©
= d) radio signal is repeated by all shadings
© § § ©
4.
press and hold = confirm selection
press briefly - confirm feedback.
5.
This brings you back to 1. Function selection menu
6. Further possibilities:
1)
press and hold = repeat process
2)
press briefly = to select an option from the 'Menu'
3)
press and hold or no operation for 25 sec. =
finish installation mode
*
Purchased shadings up to 06/13 = hardware RZINT01 (without repeater function).
When purchasing a new radio transmitter since 07/13, select point 3a to ensure usual operation.
Shading since 07/13 – hardware RZINT02 – functions as described above.
shadings which can be operated by
this radio transmittor
GB
£ £ © ©
© ª ª ©
© © © ©
£ £ © ©
51
Werbung
