Internorm I-tec Programmieranleitung Seite 48

6. Adjust display after standby
After standby of radio transmittor:
a) the first channel is always active
b) the last selected channel is active
c) all channels are always active
1. Select the 'Menu' function
2. press and hold = confirm selection
3.
press briefly = selection of display mode
= a) Always first channel after standby active
£ £ © ©
= b) Last active channel after standby
£ © £ ©
= c) All channels active after standby
© £ £ ©
4. press and hold = confirm selection
press briefly = confirm feedback.
5.
This brings you back to 1. Function selection menu
Further possibilities:
1) press and hold = repeat process
6. 2) press briefly = to select an option from the 'Menu'
3) press and hold or no operation for 25 sec. =
finish installation mode
48
© © © £
£ £ © ©
© © © ©
© © © £