Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. Program radio transmittor in shading
1.
Select the 'Menu' function
press and hold = confirm selection
2.
Scan starts
When blind has been located, the 1
3.
. When no blind has been located, the program
© £ £ £
returns to 1. Function Selection menu
4.
press briefly = enables to click through all located blinds
and select the required one
Blinds are sorted according to their signal strength:
= blind 1
© £ £ £
= blind 2
£ © £ £
= blind 3
£ £ © £
Check for activated blind with
5.
press and hold = confirm selection
6.
press briefly = select channel
= channel 1
© £ £ £
= channel 2
£ © £ £
press and hold = confirm selection
7.
Programming process starts
8.
Possible feed back:
= Ok
© © © ©
LED flashes
No communication/error, repeat process.
LEDs flashes
shading memory full, delete radio transmittor or channel
press briefly = confirm feed back.
9.
This brings you back to 1. Function Selection menu
Further possibilities:
1)
press and hold = repeat process.
10.
2)
press briefly = to select an option from the 'Menu'
3)
press and hold or no operation for 25 sec. =
finish installation mode
44
£ £ £ ©
© £ £ ©
£ © £ ©
£ £ © £
£ £ £ ©
/
ª £ £ £
£ £ £ ª
/
ª ª £ £
£ £ ª ª
LED flashes
st
£ © © ©
= blind 4
= blind 5
= blind 6 ...
or
!
= channel 3
= channel 4
(from 1 to 4) =
(from 1,2 to 3,4) =
£ © © ©
ª ª ª ª
© £ £ £
© £ £ £
© £ £ £
© £ £ £
ª ª ª ª
© © © ©
£ © © ©
Werbung
