5. a) Delete radio channel from shading
1.
Select the 'Menu' function
2.
press and hold = confirm selection
3.
press briefly = selection of channel which should be
deleted from all shadings
© £ £ £
£ © £ £
press and hold = confirm selection
4.
Delete process starts
5.
Delete process completed
press briefly = confirm feed back.
6.
This brings you back to 1. Function Selection menu
Further possibilities:
1)
press and hold = repeat process
7.
2)
press briefly = to select an option from the 'Menu'
3)
press and hold or no operation for 25 sec. =
finish installation mode
5. b) Hide shading
This function ensures that the shading will not be found during a scan and
therefore prevents unintentional programming.
1.
Select the 'Menu' function
2.
press and hold = confirm selection
3.
press briefly = selection of channel which should
be hidden
© £ £ £
£ © £ £
4.
press and hold = process starts
5.
Process completed (previously selected LED flashes)
press briefly = end function.
6.
This brings you back to 1. Function selection menu
Further possibilities:
1)
press and hold = repeat process
2)
press briefly = to select an option from the 'Menu'
7.
3)
press and hold or no operation for 25 sec. =
finish installation mode
46
= channel 1
£ £ © £
= channel 2
£ £ £ ©
= channel 1
£ £ © £
= channel 2
£ £ £ ©
= channel 3
= channel 4
= channel 3
= channel 4
© © £ ©
© £ £ £
ª ª ª ª
© © © ©
© © £ ©
© © £ ©
© £ £ £
ª ª ª ª
© £ £ £
© © £ ©