Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5. c) Show shading
This function can only be performed with the same radio transmittor which
was used to hide the shading. If this radio transmittor no longer exists, use the
service button on the circuit board of the motor unit. This requires removing the
shading.
1.
Select the 'Menu' function
2.
press and hold = confirm selection
3.
press briefly = select channel which will be unlocked
= channel 1
© £ £ £
= channel 2
£ © £ £
4.
press and hold = process starts
5.
Process completed (previously selected LED flashes)
press briefly = finish function.
6.
This brings you back to 1. Function selection menu
Further possibilities:
1)
press and hold = repeat process
2)
press briefly = to select an option from the 'Menu'
7.
3)
press and hold or no operation for 25 sec. =
finish installation mode
= channel 3
£ £ © £
= channel 4
£ £ £ ©
GB
© © £ ©
© £ £ £
ª ª ª ª
© £ £ £
© © £ ©
47
Werbung
