Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Interruption of sunrise mode
If the function sunrise is activated, the following sunrise can be skipped by
operating buttons
automatically go up the following morning.
INSTALLATION MODE
Programming of the shading is carried out exclusively in installation mode.
Switch between operating and installation mode by pressing the programming
button for about 2 seconds which can be found on the back of the remote
control. Remove the remote control from the window frame or open the housing
of the hand sender.
Programming instructions
Overview Function selection menu
press briefly – select individual menus
press and hold – activate selected menu
1. Individual fixed position of shading
© © £ £
2. Activate required automatic function
© © £ £
3. Program radio transmitter in shading
£ © © ©
4. Delete radio transmitter from shading
© £ © ©
5. a) Delete radio channel from shading
© © £ ©
6. Adjust display after standby
© © © £
7. a) Adjust length of shading
£ © © £
8. Activate repeater function on radio transmitter
£ £ © ©
If no selection has been made after 25 seconds or no other key has been
pressed, the base element automatically returns to operating mode.
42
or
in the evening; this means that the shading will not
b) Hide shading
c) Show shading
b) Calibrate top end position of shading
page 43
page 43
page 44
page 45
page 46
page 46
page 47
page 48
page 49
page 50
page 51
Werbung
