1. Individual fixed position of blind
Move with key
1.
to required slat position
2. Open cover of base element –
3. Press buttons
4. Saving of fixed position is completed, when LED`s stopped
scanning
Further possibilities:
1)
press briefly = to select an option from the 'Menu'
5.
2)
press and hold or no operation for 25 sec. =
finish installation mode
2. Activate required automatic function
If an automatic function is activated, after a programming phase of max. 36 hours,
depending on the activated automatic function, I-tec shading recognises sunrise,
sunset or overheating of the room automatically.
1.
Select function selecting menu
2.
press and hold = confirm selection
press briefly = select required automatic function
= sunrise automatic
© £ £ £
= sunset automatic
£ £ £ ©
3.
= permanent heat protection
£ © © £
= seasonal heat protection
© £ © £
= delete automatic functions
© © © ©
4.
press and hold = confirm selection
5.
press briefly = selection of channel whose
automatic should be activated
= channel 1
¢ £ £ £
= channel 2
£ ¢ £ £
6.
press and hold = confirm selection
7.
Activation completed
Further options:
1)
press and hold = repeat process
8.
2)
press briefly = to the next function selecting menu
3)
press twice and hold or no operation for 25 seconds =
completion of installation mode
or
to required end position and move
press and hold
and
at the same time
£ £ ¢ £
£ £ £ ¢
¢ ¢ ¢ ¢
= channel 3
= channel 4
= all channels
GB
X
© © £ £
ª ª ª ª
© © £ £
© © £ £
ª ª ª ª
© £ £ £
¢ ¢ ¢ ¢
¢ £ £ £
ª ª ª ª
© £ £ £
43