7. a) Adjust length of blind
1. Select the 'Menu' function
2.
press and hold = confirm selection
3.
press briefly = select shading whose length should be
adjusted. Shading needs to be programmed before.
= channel 1
© £ £ £
= channel 2
£ © £ £
4.
press and hold = confirm selection
LED flashes faster after selection
5. Adjust bottom end position with button
6.
Press and hold = confirm selection
Blind moves to top end position
Selected LED flashes ¢ confirm with press briefly
7.
IMPORTANT: wait until blind has moved to top end position
and stops, before confirming with press briefly
Further possibilities:
1)
press and hold = repeat process
8.
2)
press briefly = to select an option from the 'Menu'
3)
press and hold or no operation for 25 sec. =
finish installation mode
= channel 3
£ £ © £
= channel 4
£ £ £ ©
or
GB
£ © © £
© © © ©
© £ £ £
ª £ £ £
ª ª ª ª
ª £ £ £
49