Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. As shown in the figure, gently lift the in-
nermost glass towards "A" and then,
remove it by pulling towards "B".
4. Repeat the same process for removing
the second and third glasses.
The first step of regrouping the door is to
replace the second and third glasses (2, 3).
As shown in the figure, place the bevelled
edge of the glass to meet the bevelled
edge of the plastic slot.
The attachment order of the second and
third inner glasses is not important, as
they are interchangeable.
While attaching the innermost glass (1),
pay attention to place the printed side of
the glass on the second inner glass. It is
crucial to place the lower corners of all in-
ner glasses to meet the lower plastic slots
(5). Push the plastic component towards
the frame until a "click" sound is heard.
After cleaning, all glasses must be
reassembled.
7.8 Cleaning the Oven Lamp
In the event that the glass door of the oven
lamp in the cooking area becomes dirty;
clean using dishwashing detergent, warm
water and a soft cloth or sponge and dry
with a dry cloth. In case of oven lamp fail-
ure, you can replace the oven lamp by fol-
lowing the sections that follow.
Replacing the oven lamp
General Warnings
• To avoid the risk of electric shock before
replacing the oven lamp, disconnect the
product and wait for the oven to cool.
Hot surfaces may cause burns!
• This oven is powered by an incandes-
cent lamp with less than 40 W, less than
60 mm in height, less than 30 mm in dia-
meter, or a halogen lamp with G9 sock-
ets with less than 60 W power. Lamps
are suitable for operation at temperat-
ures above 300 °C. Oven lamps are avail-
able from Authorised Services or li-
censed technicians. This product con-
tains a G energy class lamp.
• The position of the lamp may differ from
that is shown in the figure.
• The lamp used in this product is not
suitable for use in the lighting of home
rooms. The purpose of this lamp is to
help the user see food products.
• The lamps used in this product must
withstand extreme physical conditions
such as temperatures above 50 °C.
If your oven has a round lamp,
1. Disconnect the product from the elec-
tricity.
2. Remove the glass cover by turning it
counter clockwise.
3. If your oven lamp is type (A) shown in
the figure below, rotate the oven lamp
as shown in the figure and replace it
EN / 44
EN
DE
Werbung
