Beko BBIM13400XMPSEW Bedienungsanleitung Seite 41

• Before using the pyrolysis function, re-
move all accessories, the telescopic
shelf and the side shelves (if any). If not
removed, the accessories and side wire
shelves will be damaged.
• If your product has a pyro proof access-
ory (resistant to high temperature self-
cleaning), you do not need to remove
these accessories from the oven.
Whether your accessories are pyro-proof
or not is specified in the accessories
section. If not specified, your accessor-
ies are not resistant to high temperat-
ures. It must be removed from the oven
before cleaning to avoid damage.
• Do not clean the door seal. The glass
fiber seal is very delicate and easily
damaged. If the door seal is damaged,
replace it with a new one from an au-
thorized service.
To start the pyrolysis function:
1. Remove all accessories inside the oven.
In the models with wire shelves, re-
member to remove the wire shelf.
2. Before starting the cleaning, clean the
outer surfaces of the oven and the food
residues inside the oven with soapy
cloth.
3. Select the "Pyrolysis" or "Pyrolysis -
economy mode" function according to
the dirtiness condition of your oven. If
your oven is not very dirty, we recom-
mend using the "Pyrolysis - economy
mode" function. This function takes
less time than the "Pyrolysisvariable"
function. If the oven is very dirty, the
"Pyrolysis - economy mode" function
may not be sufficient. In this case,
clean it by the "Pyrolysis" function.
4. Turn the oven on by touching the
key.
5. Activate the lower row operating func-
tions by touching the "Extra function
activation" on the function display.
6. Touch on "Pyrolysis" on the bottom row
on the function display.
7. "HI" pyrolysis level and "02:00" time
appear on the display.
8. Start cleaning by touching the
ð Cleaning starts and the self-clean-
ing time appears on the display.
This time is unchangeable.
9. When the oven reaches a certain tem-
perature after the pyrolysis process
starts, the
the timer display and the oven door
cannot be opened. Do not force the
handle to unlock the door until the
cleaning process is finished and the
lock symbol disappears from the dis-
play.
10.When the cleaning process is finished,
"End" appears on the display. Turn off
the oven by touching the
11.When the
display, remove the remaining deposits
with vinegar water.
EN / 41
lock symbol appears on
key.
symbol disappears on the
EN
DE
key.