Yamaha AM802 Bedienungsanleitung Seite 3

Congratulations!
Your АМ802 is a high-performance 8-in/2-out mixer that will deliver outstanding sonic performance _
and broad control versatility in a variety of applications.
In order to make the most of the AM802' e many features and fine performance, we urge you to read
this operation manual thoroughly, and keep it in a safe place for later reference.
CONTENTS
CONTROLS & CONNECTORS ................ 2
CONTROLS ........................... 3
Input Channels ....................... 3
Master Control Section ................ 4
CONNECTORS ........................ 5
PRECAUTIONS
SAMPLE APPLICATIONS .................... 6
LEVEL DIAGRAM ........................... 7
DIMENSIONS .............................. 7
SPECIFICATIONS .......................... 8
BLOCK DIAGRAM ......................... 10
1. AVOID EXCESSIVE HEAT, HUMIDITY,
DUST AND VIBRATION
Keep the unit away from locations where it is likely
to be exposed to high temperatures or humidity —
such as near radiators, stoves, etc. Also avoid lo-
cations which are subject to excessive dust accu-
mulation or vibration which could cause mechanical
damage.
2. AVOID PHYSICAL SHOCKS
Strong physical shocks to the unit can cause dam-
age. Handle it with care.
3. DO NOT OPEN THE CASE OR ATTEMPT
REPAIRS OR MODIFICATIONS YOURSELF
This product contains no user-serviceable parts.
Refer all maintenance to qualified YAMAHA service `
personnel. Opening the case and/or tampering with
the internal circuitry will void the warranty.
4.MAKE SURE POWER 15 OFF BEFORE
MAKING OR REMOVING CONNECTIONS
Always turn the power OFF prior to connecting or
disconnecting cables. This is important to prevent
damage to the unit itself as well as other con-
nected equipment. |
5. HANDLE CABLES CAREFULLY
Always plug and unplug cables — including the AC
cord — by gripping the connector, not the cord.
6. CLEAN WITH A SOFT DRY CLOTH
Never use solvents such as benzine or thinner to
clean the unit. Wipe clean with a soft, dry cloth.
7T. ALWAYS USE THE CORRECT POWER
SUPPLY | |
Make sure that the power supply voltage specified
on the rear panel matches your local AC mains
supply.