Yamaha AM802 Bedienungsanleitung Seite 10

SPECIFICATIONS
Frequency Response
+1, -2 dB, 20 Hz — 20 kHz, 10 kohms, 0 dB (ST
OUT) | |
+1, -2 dB, 20 Hz — 20 kHz, 10 kohms, -10 dB
(AUX SND 1 — 3), (REC OUT)
Total Harmonic Distortion |
Less than 0.0595, 20 Hz — 20 kHz, 10 kohms,
410 dB
Hum & Noise* (20 Hz — 20 kHz, Rs z 150
ohms, CH1 — 6 Gain max.)
—122dB (CH1 — 6) equivalent input noise.
—90 dB (ST OUT) residual output noise.
-76 dB (76 dB S/N) at ST OUT, Master fader
nominal, all channel faders minimum.
-/2 dB (72dB S/N) at ST OUT, Master fader
nominal, channel 1 — 6 faders nominal.
-88 dB (78 dB S/N) at AUX SND, all channel
AUX controls minimum.
-82 dB (72 dB S/N) at channel 1 — 6 faders
nominal, AUX controls nominal.
Maximum Output Level
417.5 dB, 20 Hz — 20 kHz, 10 kohms, THD
0.296
Maximum Voltage Gain
62 dB CHI — 6 IN to ST OUT
22 dB CH7,8 IN to ST OUT
58 dB CH1 — 6 IN to AUX SND
18 dB CH7, 8 IN to AUX SND
32 dB AUX RTN to ST OUT
Crosstalk
—60 dB at 1 kHz, adjacent channel inputs.
—60 dB at 1 kHz, input to output.
Input Channel Equalization (CH1 — 8)
15 dB maximum boost or cut
Hl: 10 kHz (shelving)
LO: 100 Hz (shelving)
Level Meters
ST OUT L, R (020 dB)
Clip Indicators (CH1 — 6 input)
CLIP (red) lights when pre-fader signal is 3 dB
below clipping.
Power Requirement
Power requirements match local AC mains volt-
age and frequency in area where sold.
Power Consumption
U.S. & Canadian Models: 12 watts
General Model: 15 watts
Dimensions (W x H x D)
354 x 98.5 x 301 mm
(13-15/16" x 3-7/8" x 11-7/8")
Weight
2.7 kg (5 Ibs. 15 oz)
* Measured with a —6 dB/octave LPF ( 12.7 kHz.
e Ü dB = 0.775 Vrms