Battery Charge Level - Meec tools 024905 Bedienungsanleitung

DESCRIPTION
1. Status light
2. Lock button for power switch
3. Power switch
FIG. 1
SAFETY SYSTEM FOR BATTERY
POWERED SECATEURS AND
BATTERY
The secateurs have a safety system that
automatically switches them off in the
following situations to prolong the battery life.
Overload protection
The secateurs switch off automatically if
overloaded or handled in such a way that there
is an abnormal consumption of power. If this
happens, switch off the secateurs and stop
working in this way. Switch on the secateurs
again.
Overheating protection
The secateurs switch off automatically if
overloaded or handled in such a way that there
is a risk of them or the battery overheating.
Allow the secateurs and the battery to cool
before switching on again.
Over-discharge protection
The secateurs switch off automatically if the
battery is discharged to a dangerously low
level.
USE
1. Fit the blades around the branch to be cut.
2. Press the lock button.
3. Press the power switch. The blades on the
secateurs close and the branch is cut off.
4. Switch off by releasing the power switch.
This opens the blades.
WARNING!
• To reduce the risk of accidental starting
and personal injury the power switch on
the secateurs has a power switch lock.
Do not use the secateurs if they can be
started without pressing the power
switch lock.
• Do not in any circumstances bypass the
power switch lock, tape it to press it in,
or otherwise modify it.
NOTE:
Do not attempt to press the power switch
without pressing in the power switch lock.
This can damage the power switch.

BATTERY CHARGE LEVEL

The status light shows the battery charge level
with three different colours:
• Green = fully charged
• Yellow = semi charged
• Red = discharged
EN
21