Meec tools 024905 Bedienungsanleitung Seite 19

• If dust extraction and dust collection
equipment is available, this should be
connected and used correctly. The use of
such equipment can reduce the risk of
dust-related problems.
• Do not allow the fact that you are used to
working with similar tools cause you to
become over-confident and to disregard
the safety instructions for the tool. A
moment of inattention or carelessness
can result in serious personal injury.
USING AND LOOKING AFTER
POWER TOOLS
• Do not force the power tool. Use the
correct power tool for the planned work.
The tool does the job better and more
safely when used at the rate for which it
was designed.
• Do not use the tool if it cannot be
switched on and off with the power
switch. Power tools that cannot be
controlled with the power switch are
dangerous and must be repaired.
• Pull out the plug and/or remove the
battery before making any adjustments,
changing accessories or putting the power
tool away. These safety precautions
reduce the risk of accidentally starting the
power tool.
• Store power tools out of the reach of
children when not in use. Never allow
children, or anyone who is unfamiliar with
the power tool and these instructions, to
use the tool. Power tools are dangerous if
used by inexperienced persons.
• Maintain power tools and accessories.
Check that moving parts are properly
adjusted and do not jam, and that no
parts are incorrectly fitted or damaged.
Check for other factors that could affect
functionality. If a power tool is damaged it
must be repaired before it is used again.
Many accidents are caused by poorly
maintained power tools.
• Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to jam
and are easier to control.
• Use the power tool, accessories and bits
etc., in accordance with these instructions,
taking into account the actual working
conditions and the work that is to be
done. It can be dangerous to use power
tools for purposes other than those they
are intended to be used for.
• Keep handles and grips clean, dry and free
from oil and grease. Greasy handles and
grips make it difficult to hold and control
the tool in unexpected situations.
USING AND MAINTAINING
BATTERY-POWERED TOOLS
• Only charge the battery with the charger
recommended by the manufacturer. The
use of other chargers can result in a risk of
personal injury and/or fire.
• Only use batteries recommended by the
manufacturer. The use of other batteries
can result in a risk of personal injury and/
or fire.
• When the battery is not in use keep it
away from paperclips, coins, keys, nails,
screws and other metal objects that can
short circuit the terminals. Short circuiting
discharges large amounts of energy that
can cause a fire and/or burn injuries.
• Failure to handle the battery carefully can
cause fluid to leak from the battery. Avoid
contact with battery fluid. On contact with
battery fluid, rinse immediately with
plenty of fresh water. Seek medical
attention if you get battery fluid in your
eyes. Battery fluid can cause skin irritation
and/or burns.
• Do not use damaged or modified
batteries, or power tools that are
damaged. Damaged or modified batteries
can behave unexpectedly and cause a fire,
explosion or risk of personal injury.
• Do not expose the battery to naked flames
or heat. Batteries can explode when
exposed to naked flames or temperatures
higher than 130°C.
EN
19