Instrument Panel - Jacobsen HR 9016 Turbo Bedienungsanleitung

4.3

INSTRUMENT PANEL ______________________________________________________

! WARNING
1) READ OPERATORS MANUAL. DO NOT
ALLOW UNTRAINED OPERATORS TO
USE THIS MACHINE.
2) KEEP SHIELDS IN PLACE AND
HARDWARE SECURELY FASTENED.
3) BEFORE YOU CLEAN, ADJUST,
OR REPAIR THIS EQUIPMENT,
DISENGAGE ALL DRIVES, ENGAGE
PARKING BRAKE AND STOP ENGINE.
4) KEEP HANDS, FEET AND CLOTHING
AWAY FROM MOVING PARTS.
5) NEVER CARRY PASSENGERS
6) KEEP BYSTANDERS AWAY.
M
Y
K
Z
L
X
AA
K. Alarm System Test Switch
Used to test the alarm system. To test, turn ignition
key to RUN and press switch. An audible alarm will
sound and warning lights will come on.
L. 2WD / 4 WD Switch - Forward
Sets mower into two or four wheel drive. Mower must
be in 4WD to operate cutting units.
Mower returns to 2WD when backing up unless 4WD
reverse switch (Z) is pressed.
M. Engine Throttle
Controls engine speed. Run machine at full throttle
when transporting machine.
N
O
P
Q
3009073
R
S
T
U
V
W
Figure 4C
N. Check Engine Light
Indicates that a fault has occurred in the engine
control system. Refer to the Parts & Maintenance
manual.
O. Deck Levers
Raises and lowers decks. Decks can be raised or
lowered separately or together. When raising decks
hold lever back until deck is completely up. Levers
return to Neutral when released.
P. Traction Control
Transfers weight between decks and mower.
Turn control clockwise to reduce down
pressure on decks and transfer weight to
mower. Reducing down pressure improves
traction but may cause decks to float causing an
uneven cut.
To increase down pressure on decks turn
control counterclockwise.
traction but improves deck contact with
ground.
Q. Light Switch (optional)
Controls operation of road and work lights.
R. Warning Lights
Alerts the operator to conditions requiring immediate
action. See Section 4.4.
S. Engine Coolant Temperature
Indicates engine
operating temperature should be between 160° -
230° F (71°-110° C). If temperature rises above 230°
(110° C), alarm will sound. See Section 4.4.
T. Fuel Gauge
Indicates current fuel level. Check fuel gauge daily
before starting machine.
U. Hour Meter
Records engine operating hours. Use hour meter to
schedule periodic maintenance.
CONTROLS
This
coolant temperature.
4
reduces
Normal
14