Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.2 Aluminium Filter
This filter serves to retain oil particles in the
air. It is recommended to clean the filter
once a month under normal usage. To
achieve this:
1. Remove the aluminium filters.
2. Wash the filters in water using liquid de-
tergent and reinstall after drying.
Aluminium filters may change colour as
they are washed; this is normal and does
not require replacing your filters.
You can also wash the aluminium
filter in the washing machine. (max.
70 °C)
Removing aluminium filters
1. Push the aluminium filter lock forward.
2. Lower the filter slightly and pull it for-
ward. Otherwise, you can tilt the filter.
3. Reinstall the aluminium filter in its slot
after flushing by following the above
steps in reverse.
5.3 Hood Lamp
In the event of a lamp malfunction in the
hood, contact your local dealer or the Cus-
tomer Service, and ensure that the lamp is
replaced.
5.4 Carbon Filter (Usage without a
flue)
General warnings
• If you have installed your product without
a flue, you should replace your carbon fil-
ters every 4 months in normal use. You
can obtain the carbon filter from Author-
ized Services.
• The carbon filter should never be
washed.
• If you do not follow the rules for cleaning
and replacing the filters of your hood, you
may cause a fire.
Removing carbon filter
1. Remove the aluminium filters.
2. Release the locks of the carbon filter
from their slots (1).
3. Remove the pins on the other end of the
carbon filter from its socket and pull it
out in the direction of the arrow (2).
4. Reverse this process, first insert the
tabs into the slot of the new carbon fil-
ter and then push the locks upwards.
5. Install the aluminium filters.
EN / 19
EN
DE
FR
NL
Werbung
