Werbung
Verfügbare Sprachen
Verfügbare Sprachen
If you run your hood at any speed
level with the aluminium filter fill
warning, the warning will not ap-
pear for as long as the hood is run-
ning. When you turn off the hood,
the fill warning starts flashing
again.
If you turn off the warning without
cleaning the aluminium filter, the
operating time of 100 hours is reset
and it starts over. At the end of the
next 100 hours, your hood warns
again.
Carbon filter fill warning (for products with
carbon filter)
The light of
key flashes after every 100
hours of operation. In this case, you must
replace your carbon filter. Consult an au-
thorized service for this. After replacement,
the lamp warning of
off automatically. When you touch the
key for more than 3 seconds, carbon filter
fill warning is reset and the lamp is turned
off.
The warning is not cancelled if the
power is cut when the hood gives
carbon filter fill warning. When the
power is available, it continues to
warn with the light of
ing.
If you run your hood at any speed
level with the carbon filter fill warn-
ing, the warning will not appear for
as long as the hood is running.
When you turn off the hood, the fill
warning starts flashing again.
If you turn off the warning without
replacing the carbon filter, the oper-
ating time of 100 hours is reset and
it starts over. At the end of the next
100 hours, warning is given again.
key does not turn
key flash-
Hood and hob combined working (Hob to
Hood function)
If you have a hob equipped the "Hob to
Hood" function on top of a hood, you can
connect your hood and hob together and
have your hood operate automatically ac-
cording to the cooking level of your hob.
Pairing the hood and hob
To match your hood and hob, touch the ""
" " button for about 2 seconds with the
hood switched off. The " " button flashes
on the display. Meanwhile, touch the cor-
responding button on your hob (see hob
manual). The " " button on the display
lights up continuously when the pairing is
done. The hob and hood are paired.
Canceling the hood and hob connection
If you do not want your hood and hob to
work together, touch the corresponding
button on the hob (see hob manual) or the
" " button on the hood to cancel the pair-
ing. The symbol on whichever product you
have touched goes out, the corresponding
button on the other product flashes for a
while and then goes out completely.
In case of interference in any speed
level while the "Hob to Hood" func-
tion is active, the feature is can-
celed and the cooker-hood is dis-
connected.
Hood and hob combined working (Hob to
Hood function)
If you have a hob equipped the "Hob to
Hood" function on top of a hood, you can
connect your hood and hob together and
have your hood operate automatically ac-
cording to the cooking level of your hob.
Pairing the hood and hob
To match your hood and hob, touch the ""
" " button for about 2 seconds with the
hood switched off. The " " button flashes
on the display. Meanwhile, touch the cor-
responding button on your hob (see hob
EN / 16
Werbung
