Reinigung und Wartung II
Cleaning and Maintenance II
Reinigung und Wartung der Abscheider
Weisen die X-CYCLONE® Aerosolabscheider oder die AGG-Agglomeratoren
Verschmutzungen in Form von Verharzungen oder Filterkuchen auf, sind diese
mit einem Hochdruckgerät oder einer Industriewaschmaschine, z. B., zu reinigen.
Bei der Abscheidung von Medien, von denen eine biologische oder mikrobiologische
Gefährdung durch Bildung von Schimmelkulturen, Viren oder Bakterien ausgeht, müssen
§ kurze Wartungs- und Reinigungsintervalle unbedingt regelmäßig eingehalten werden.
§ Zur Reinigung der Filteranlage empfehlen wir den biologischen Entöler Oil-Free V2000.
Cleaning and Maintenance of the Separators
If the X-CYCLONE® aerosol separator or the AGG agglomerator show strong contamination
in the form of gumming or filter caking, they should be cleaned with the help of a
high-pressure cleaner or an industrial washing machine, for example. If the media to be
separated constitute a biological or microbiological hazard, because they form mildew
cultures, viruses or bacteria, for example, it is imperative that
§ regular maintenance and cleaning cycles be observed at short intervals.
§ We recommend the biological oil remover
Oil-Free V2000 for the cleaning of the filter system.
Gehen Sie wie folgt vor: /
1
Das Gerät abschalten und vor dem Öffnen der Wartungstür vom Netz trennen.
Switch off the device and separate it from the power supply before you
open the maintenance door.
Wenn im Abscheider gesundheitsgefährdende Stoffe abgeschieden werden, muss
vor dem Öffnen der Wartungstür entsprechende Schutzausrüstung angelegt werden.
2
§ Sonst besteht je nach Abscheidemedium die Gefahr
von Vergiftung, Verätzung und / oder
If materials that are hazardous to your health are separated in the device,
!
put appropriate protective clothing on before you open the maintenance door.
§ This helps to avoid burns, poisoning and / or caustic burns
depending on the nature of the separated medium.
3
Vor dem Öffnen der Wartungstür, den Stillstand des Ventilators abwarten.
Wait until the fan has stopped rotating before you open the maintenance door.
Follow the instructions below:
Verbrennung.
16