Herunterladen Diese Seite drucken

Reven X-CYCLONE RKM Serie Bedienungs- Und Wartungsanleitung Seite 18

Kanalabscheider
Vorschau ausblenden Andere Handbücher für X-CYCLONE RKM Serie:

Werbung

Reinigung und Wartung IV
Cleaning and Maintenance IV
Als Richtwerte der Wartungsintervalle gilt: /
Einsatzfall /
Case of application
Reine Flüssigkeitsabscheidung:
Wasserlösliche Kühlschmierstoffe ohne
Staubpartikel oder sonstige Feststoffe.
Separation of pure liquids, water-soluble
cooling lubricants without any dust
particles or other solid matters.
Abscheidung von Emulsionen
aus flüssigen und festen Partikeln:
Flüssigkeit mit einem hohen Anteil an
Feststoffpartikeln und zu Verharzungen
neigenden Kühlschmierstoffen.
Separation of emulsions composed of liquid
and solid particles: Liquids with a high portion
of solid particles and cooling lubricants with
a tendency to gumming.
Bei starken Verunreinigungen der
Emulsionen und bei Festpartikeln.
Separation of strongly contaminated
emulsions and solid particles.
ACHTUNG:
Bei Verwendung von anderen als den Originalteilen
§
erlischt jede Gewährleistung und die Funktionsgarantie des Gerätes.
!
ATTENTION:
The use of any parts other than the original ones will result in the
§
termination of our warranty and functional guarantee for the device.
Recommended maintenance intervals:
Wartungsintervall /
Wir empfehlen alle 6 Monate eine Routinekontrolle
und alle 12 Monate eine Reinigung der Filterstufen.
We recommend a routine inspection every 6 months
and the cleaning of the filter stages every 12 months.
Wir empfehlen, die Filter anfänglich einmal pro Woche
zu kontrollieren und je nach Verschmutzungsgrad der
ersten Filterstufe die Reinigungsintervalle festzulegen.
We recommend that the filters be inspected once a week
to begin with and that cleaning intervals be set according
to the degree of contamination of the first filter stage.
Wir empfehlen, gegebenenfalls einen zusätzlichen
Vorfilter am Maschinenausgang (Flansch) zum
Gerät zu installieren. Kontrolle einmal wöchentlich.
We recommend the installation of an additional
prefilter at the outlet of the machine (flange) to
the device, if required. Inspection once a week.
Maintenance interval
18

Werbung

loading