Husqvarna DS150 Bedienungsanweisung Seite 11

5. Attach the rubber washer to the quick-release
washer on the drill spindle.
6. Connect the slurry collector to the connection of the
slurry ring.
7. Put the slurry ring on the drill spindle (C). Install the
drill bit to the drill spindle (D).
C
1341 - 005 - 28.09.2023
D
8. Start the slurry collector.
9. Lift the drill bit to the ceiling. Attach the slurry ring to
the ceiling.
11