Horizon Hobby parkzone Stinson Reliant SR-10 BNF/PNP Bedienungsanleitung Seite 8

EN
Installing Landing Gear
1. Turn over aircraft to install landing gear on the bottom of
the aircraft.
2. Put left landing gear tab (marked with "L") in the slot in the
left fairing on the bottom of the aircraft.
3. Lift the landing gear tab near the three (3) holes in the
fairing and install three (3) screws in the holes in the tab.
4. Align, turn and tighten the screws in the holes in the
bottom of the aircraft.
8
5. Install right (marked with "R") landing gear using the steps
above.