Horizon Hobby parkzone Stinson Reliant SR-10 BNF/PNP Bedienungsanleitung Seite 16

EN
Motor and ESC Removal
3. Put the propeller on the collet shaft.
Notice: The propeller side with the numbers for diameter and
pitch (for example 9.5 x 7.5) should face out from the propeller
back plate.
4. Put the spinner nut on the collet shaft.
5. Tighten the spinner nut on the motor shaft to hold the
propeller on the motor. Tools may be required to tighten the
nut.
16