Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Page EN-16
Assembly
9. Only for exhaust air operation: Insert the
exhaust air hose (4) into the connection
at the wall break (hose end with 150 mm
diameter).
10. Connect the mains plug to a properly in-
stalled socket.
For a short time, all sensors will be illumi-
nated on the cover.
(8)
(6)
2x
11. Pull the upper part of the flue screen (2)
all the way up to the wall bracket for the
upper flue screen (6).
12. Screw the upper flue screen on tight-
ly using two plate screws (8).
Installation is now complete.
(2)
Werbung
