Materials required for assembly
Parts list
(1) Exhaust hood
(2) Upper part of the flue screen
(3) Lower part of the flue screen
(4) Exhaust air operation: Exhaust air hose
(5) Exhaust air operation: Check valve
(6) Wall bracket for upper flue screen
(7) Retaining plate for lower flue screen
(8) 6 plate screws 4.0 × 8 mm
(9) Cable ties
Materials required for assembly
Tools and aids
You will need:
– Screwdriver
– Drill with stone bit (ø 8 mm)
– Measuring tape / ruler
(1)
– Level
– Pencil
– Stable stepladder
– Work gloves
(2)
We also recommend having a second person
with you to help.
(3)
Screws
(4)
The screws and dowels required to
mount the appliance on a wall are not
(5)
included in the package contents as their type
and dimensions will vary depending on the
characteristics of the wall.
(6)
Please have a specialist advise you as to
(7)
which ones you need.
(8)
(9)
In total, you will need
– 2 round-head screws (10) to attach the
wall bracket for the upper flue screen (6)
– 2 round-head screws (11) for hanging the
exhaust hood
– 2 round-head screws (12) with flat was-
hers to secure the exhaust hood.
– 6 suitable wall plugs
Page EN-11
(10)
(11)
(12)