Sunny Health & Fitness SF-RB4850 Bedienungsanleitung Seite 9

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
STEP 3:
Remove 4 Screws (No. 20), 4 Spring
Washers (No. 12) and 4 Arc Washers (No.
22) from the Main Frame (No. 1) using Allen
Wrench (No. 97).
Insert the Handlebar Post (No. 2) into the
Upright Tube Cover (No. 24) and move the
Upright Tube Cover (No. 24) higher.
Connect the Sensor Extension Wire 1 (No.
102) with Sensor Extension Wire 2 (No. 101),
and connect Extension Wire 2 (No. 56) with
Extension Wire 1 (No. 44).
Attach the Handlebar Post (No. 2) to the Main
Frame (No. 1) with 4 Screws (No. 20), 4
Spring Washers (No. 12) and 4 Arc Washers
(No. 22) that were just removed. Tighten and
secure with the Allen Wrench (No. 97).
Move the Upright Tube Cover (No. 24) lower
so it snaps into the Main Frame (No. 1).
STEP 4:
Remove 2 Screws (No. 20), 2 Spring
Washers (No. 12) and 2 Arc Washers (No. 22)
from the Handlebar Post (No. 2) using Allen
Wrench (No. 97). Then attach the Armrest
(No. 7) to the Handlebar Post (No. 2) with 2
Screws (No. 20), 2 Spring Washers (No. 12)
and 2 Arc Washers (No. 22) that were just
removed. Tighten and secure with the Allen
Wrench (No. 97).
Remove 2 Screws (No. 19) and 2 Flat
Washers (No. 53) from the Handlebar Post
(No. 2) using Spanner (No. 95). Then attach
the Bottle Holder (No. 54) to the Handlebar
Post (No. 2) with 2 Screws (No. 19) and 2 Flat
Washers (No. 53) that were just removed.
Tighten and secure with the Spanner (No. 95).
12