HP LaserJet Pro 4002dwe Installations-Handbuch Seite 4

2
Connect printer
to network
hpsmart.com/setup
i.
Go to hpsmart.com/setup on a computer to set up the new printer with
EN
HP Easy Start software.
ii.
Follow the prompts to connect the printer to the network. Choose one of the
options below:
Note: If the software cannot locate the printer on the network, enter the printer's IP
address manually in the software. With hpsmart.com/setup on the printer screen,
press OK. The IP address displays on the printer screen.
iii.
Continue with the steps in the software to add the printer to the network.
4
Anschließen des
Druckers an das Netzwerk
Do not use a USB cable for setup. See Reference Guide for
EN
more information.
USB-Kabel nicht für die Einrichtung verwenden Weitere Infor-
DE
mationen hierzu finden Sie im Referenzhandbuch.
Nie używaj kabla USB do konfiguracji Więcej informacji znaj-
PL
duje się w poradniku.
Use an Ethernet cable to connect the printer to the
Ethernet
same network as the computer.
Make sure the computer Wi-Fi is turned on and in range of the
Wi-Fi printer during setup. Connect the printer to the same network
as the computer.
Podłączanie drukarki
do sieci