Herunterladen Diese Seite drucken

Briggs & Stratton 2691689-00 Bedienungsanleitung Seite 21

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 40
Specifications
Specifications Chart
Item
ENGINE
Displacement
Electrical System
Battery
Oil Capacity
Spark Plug Gap
Spark Plug Torque
Fuel Capacity
TRANSMISSION
Make and Type
MOWER DECKS
Width of cut
Number of Blades
Cutting Height
CHASSIS
Front Wheels Tire Size
Tire Inflation Pressure, Front
Rear Wheels Tire Size
Tire Inflation Pressure, Rear
Power Ratings
The gross power rating for individual gasoline engine models is labeled in accordance with SAE (Society of Automotive
Engineers) code J1940 Small Engine Power & Torque Rating Procedure, and is rated in accordance with SAE J1995. Torque
values are derived at 2600 RPM for those engines with "rpm" called out on the label and 3060 RPM for all others; horsepower
values are derived at 3600 RPM. The gross power curves can be viewed at www.BRIGGSandSTRATTON.COM. Net power
values are taken with exhaust and air cleaner installed whereas gross power values are collected without these attachments.
Actual gross engine power will be higher than net engine power and is affected by, among other things, ambient operating
conditions and engine-to-engine variability. Given the wide array of products on which engines are placed, the gasoline engine
may not develop the rated gross power when used in a given piece of power equipment. This difference is due to a variety
of factors including, but not limited to, the variety of engine components (air cleaner, exhaust, charging, cooling, carburetor,
fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine
variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for
this engine. 
Parts and Accessories
Contact an Authorized Service Dealer. 
2691689, 2692022
724 cc
12V-9A Reg
12V-230CCA
64 oz
.030 in (.76 mm)
180 lb-in (20 Nm)
16L
®
Tuff Torq
K62
48 in (122 cm)
3 standard lift
1.0-4.0 in (2.5 - 10.2 cm)
16 x 6.50-8
12-14 psi (0.82 - 0.92 Bar)
22 x 10-10
10 psi (0.68 Bar)
2691690
724 cc
12V-9A Reg
12V-230CCA
64 oz
.030 in (.76 mm)
180 lb-in (20 Nm)
16L
®
Tuff Torq
K66
50 in (127 cm)
3 standard lift
1.0-4.0 in (2.5 - 10.2 cm)
16 x 6.50-8
12-14 psi (0.82 - 0.92 Bar)
23 x 10.5-12 (2691689-00)
10 psi (0.68 Bar)
21

Werbung

loading

Diese Anleitung auch für:

2691689-012691690-002691690-012692022-00