HumanTechnik signolux S Bedienungsanleitung Seite 16

Mounting
Important note: Kindly keep in mind that
metal parts and other building materials
may interfere with the transmission of the
radio signal. As they can be either visible
or hidden at the desired mounting location
you should always carry out a functional test
at the mounting location before starting the
mounting process, and, if required, choose
a different mounting or installation location if
the reception is not guaranteed.
Mounting the »signolux« receiver
The »signolux« receiver is suited either for
free-standing installation or it can also be
mounted using the supplied wall mount. To
use it, fix the wall mount onto a wall (or raft-
er, cupboard etc.) When mounting onto a
brick- or stone wall, you may need a power
drill and stone bit to do so. Use the supplied
wall plugs in this case. Once fixed, hang
the »signolux« receiver onto the wall mount
bracket.
Figure 5: Wall mount
16 English
Safety instructions for rechargeable
batteries
Only use the specified battery type NiMH
AA (HR6)!
There is a risk of explosion if the wrong type
of battery is used. Batteries must not be ex-
posed to high or low extreme temperatures
and low air pressure during use, storage or
transport at high altitude.
Disposing of batteries in fires, ovens or me-
chanically crushing and cutting them may
cause fire or explosion. Exposing batteries
to extremely high temperatures may cause
an explosion or leakage of flammable liquid
or gas.
Batteries exposed to extremely low air pres-
sure may explode or emit flammable liquid
or gas.
Use only the original power supply with the
receiver.