Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• Select the desired washing program by pressing the
programme button
program indicator lights up.
• Press the Start/Pause button
The dishwasher will start its cycle.
Changing the program in the middle of the cycle
A wash cycle can only be changed if it has been running for
a short time, otherwise the detergent may have already been
released and the dishwasher may have already drained the
wash water.
If this is the case, the dishwasher needs to be reset
and the detergent dispenser must be refi lled.
To reset the dishwasher, follow the instructions below:
• Press the Start/Pause button
• Press the Program button
The program will be canceled.
• Select the desired washing program as described before.
• Press the Start/Pause button
The wash cycle will start after 10 seconds.
Adding dishes after starting a cycle
Caution!
Steam escaping from the machine can be very hot
and may cause scalds.
Open the door very carefully after starting a washing cycle.
A forgotten dish can be added any time before the detergent
dispenser opens.
If this is the case, follow the instructions below:
• Press the Start/Pause button
• Wait 5 seconds, then open the door.
• Add the forgotten dish(es).
• Close the door.
• Press the Start/Pause button
The wash cycle will continue after 10 seconds.
repeatedly until the corresponding
.
to pause the washing process.
for more than 3 seconds.
.
to pause the washing process.
.
Operating the Dishwasher
35
Werbung
