Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Troubleshooting
5.2 Error codes
Attention!
!
• To avoid water damage:
If an overflow occurs, turn off the main water supply before
taking other steps.
• To avoid damage to the appliance:
If there is water in the bottom tray due to overfilling or a small
leak, remove it before restarting the dishwasher.
Error code Meaning
E1
Longer inlet time
E3
Not reaching required
temperature.
E4
Overflow
E8
Failure of distribution
valve
Ed
Failure of communica-
tion between main PCB
with display pcb
50
Possible cause
• Faucet not fully turned on
• Water intake restricted
• Water pressure too low
• Malfunction of heating
element
• Some element of
dish-washer leaks
• Open circuit
• Damaged distribution
valve
• Open circuit
• Broken communication
wiring
Werbung
