Cameo ZENIT B200 Bedienungsanleitung Seite 30

CARE (carried out by user)
WARNING! Before carrying out any maintenance work, the power supply and, if
possible, all device connections must be unplugged.
PLEASE NOTE! Improper care can lead to impairment of the device or even
destruction.
1. Housing surfaces must be cleaned with a clean, damp cloth. Make sure that no moisture can
penetrate the device.
2. Air inlets and outlets must be regularly cleaned of dust and dirt. If compressed air is used,
make sure that damage to the device is prevented (e.g. fans must be blocked in this case, as
they could otherwise over-rev.).
3. Lines and plug contacts must be cleaned regularly and dust and dirt must be removed.
4. In general, no cleaning agents or abrasive agents may be used, otherwise the surface finish
may be damaged.
5. Devices must generally be stored dry and protected from dust and dirt.
6. To ensure correct and safe operation, all accessible or removable lenses and light-emitting
apertures must be cleaned regularly.
MAINTENANCE AND REPAIR (by qualified personnel only)
HAZARD! There are live components in the device. Even after disconnecting the
mains connection, there may still be residual voltage in the device, e.g. due to
charged capacitors.
NOTE! There are no assemblies in the unit that require maintenance by the user.
NOTE! Maintenance and repair work may only be carried out by sufficiently qualified
specialist personnel. If in doubt, consult a specialist workshop.
NOTE! Improperly performed maintenance work may affect warranty claims.
30