Cameo ZENIT B200 Bedienungsanleitung Seite 20

CONFIGURING DMX MODE (DMX Mode)
Press MODE to access the selection menu. Using the UP and DOWN controls, select the menu
item "DMX Mode" (observe arrow) and confirm with ENTER. In the sub-menu, you can now select
between 9 different DMX operating modes with the UP and DOWN buttons. Confirm your selection
with ENTER. Tables with the channel assignments can be found in these instructions under DMX
CONTROL.
---------------- Menu ----------------
DMX Address
DMX Mode
Stand Alone
Slave
Settings
System Info
SETTING STANDALONE MODE
Press MODE to access the selection menu. Use UP and DOWN to select the menu item "Stand
Alone" (observe arrow) and confirm with ENTER. In the sub-menu you can now select from the
standalone modes "Auto", "Colour Macro", "Static", "Tunable White" and "User Colour" as well as
the timer function "Timer" using UP and DOWN. Confirm your selection with ENTER.
---------------- Menu ----------------
DMX Address
DMX mode
Stand Alone
Slave
Settings
System Info
AUTO MODE (programme 1 - programme 6)
The 6 different auto-programmes each comprise non-editable colour-change sequences. Brightness
and speed are independently adjustable. Select auto mode as per the procedure previously descri-
bed in SETTING STAND ALONE MODE and confirm with ENTER. Using the UP and DOWN controls,
now select one of the 6 auto-programmes (observe arrow) and confirm with ENTER. To adjust
brightness, use the UP and DOWN controls to select the menu item "Dim", and confirm with ENTER,
then use the UP and DOWN controls to select the desired value between 000 and 255. Confirm with
ENTER. To adjust the run speed, select the menu item "Speed", confirm with ENTER, and then
select the desired value between 001 and 100. Confirm with ENTER. Press MODE four times to
return to the main display (Mode Auto).
----------- Stand Alone -----------
Auto
Colour Macro
Static
Tunable White
User Colour
Timer
20
------------ DMX MODE ------------
15CH Full Access
10CH Full Access
8CH (Bit
8CH User-Calibrated
6CH Factory-Calibrated
4CH User-Calibrated
3CH Factory-Calibrated
3CH Color Macro
2CH CCT Factory-Calib
------------ Stand Alone -----------
Auto
Color Macro
Static
Tunable White
User Color
Timer
---------------- Auto ----------------
Program 1
Program 2
Program 3
Program 4
Program 5
Program 6
---------- Programme x ----------
Dim <255>
Speed <100>
Dim Speed
000 001
– –
255 100
001
–
Mode
Auto
100