Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SETUP AND INSTALLATION
Thanks to the integrated plastic feet, the spotlight can be placed on a flat surface at a suitable
location. Mounting on a truss is done with the help of an omega bracket, which is fixed in the
centre of the unit base (A). An omega bracket is included in the delivery, suitable truss clamps are
optionally available. Ensure firm connections and secure the spotlight with a suitable safety rope
at the designated point (B). The adjustment of the beam direction of the LED unit is done indepen-
dently of the unit base using the wing screws on the side.
HAZARD: Overhead mounting requires extensive experience, including the calculation of
the limit values for load, the installation materials and regular safety inspection of all
installation materials and spotlights. If you do not have these qualifications, do not
attempt to perform an installation yourself. Refer instead to a qualified professional.
There is a risk that devices that are incorrectly mounted and secured may come loose
and fall down. This can cause serious injury or death.
CARE, MAINTENANCE AND REPAIR
In order to ensure the long-term, proper functioning of the device, it must be regularly cleaned
and, if necessary, maintained. The maintenance requirement depends on the intensity of use and
the environment in which it is used.
We generally recommend a visual inspection before each operation. Furthermore, we recommend
carrying out all the applicable maintenance measures specified below once every 500 operating
hours or, in the case of a lower intensity of use, at the latest after one year. Warranty claims may
be limited in the event of defects resulting from inadequate maintenance.
B
A
29
Werbung
