Werbung
Verfügbare Sprachen
Verfügbare Sprachen
IR REMOTE CONTROL
Aim the infrared remote control directly at the infrared sensor on the
front of the lamp. The maximum range is approximately 8 metres. In
DMX and Slave modes, the remote control is deactivated. Battery for IR
remote control = CR2025.
Blackout
Auto pro-
gramme
Colour macro
Strobe
Speed
Individual
colour macros
Brightness
Manual colour
mix
Fade
programmes
–
Colour preset Direct selection of colour presets 0 to 9.
ATTENTION:
1. When inserting batteries and rechargeable batteries, ensure that the polarity is
correct (see illustrations in the battery compartment or on the housing).
2. Check batteries and rechargeable batteries for damage and do not use damaged
batteries and rechargeable batteries!
28
The blackout button is used to switch off all
LEDs, regardless of operating mode enabled
via the remote control. Press the blackout
button again to reactivate the previously
selected mode.
Auto-Programmes 1 – 6. Programme
selection with
and
speed with
and
setting with
and
Colour Macros 1–15. Selection with
.
Strobe light for AUTO, FADE and MANUAL operating modes. Press
to activate. Strobe speed with
vate strobe.
Setting the running speed for Auto and Fade programmes.
Individual colour macros 1–5. Selection with
Press
and
and
Press
and
,
intensity with
and
Fade programmes Auto 1 - Auto 5. Programme selection with
and
. Programme run speed wit
setting with
and
. Programme run
and
. Brightness
and
.
and
and
to adjust brightness..
,
or
to manually mix colours. Adjust
.
and
and
.
. Press
to deacti-
und
.
and
. Brightness
Werbung
