Cameo ZENIT B200 Bedienungsanleitung Seite 21

COLOUR MACROS (Colour Macro)
15 different preset colour macros are available. Select colour macro mode as per the procedure pre-
viously described in SETTING OPERATION MODE and confirm with ENTER. Using the UP and DOWN
controls, now select the desired colour preset (observe arrow) and confirm with ENTER (Colour Off
= blackout). The display will show a three-digit number field and you can use the UP and DOWN
controls to set the desired brightness between 000 and 100. Confirm with ENTER. Press MODE three
times to return to the main display (colour macro mode).
----------- Stand Alone -----------
Auto
Colour Macro
Static
Tunable White
User Colour
Timer
STATIC MODE (Static)
The static mode allows the Dimmer, Strobe, R, G, B, W to be adjusted directly on the device with
values between 000 and 255, in a similar way to with a DMX controller. In this way, an individual
scene can be created without an additional DMX controller. Select static mode as per the proce-
dure previously described in SETTING OPERATION MODE and confirm with ENTER. Using the UP
and DOWN controls, now select the menu item that you wish to edit (observe arrow) and confirm
with ENTER. The display will show a three-digit number field and you can use the UP and DOWN
controls to configure the desired value between 000 and 255. Confirm with ENTER. Press MODE
three times to return to the main display (static mode).
----------- Stand Alone -----------
Auto
Colour Macro
Static
Tunable White
User Colour
Timer
--------- Colour Macro ---------
Colour Off
Red <100>
Amber <100>
Yellow Warm <100>
Yellow <100>
Green <100>
Turquoise <100>
Cyan <100>
---------------- Static ----------------
Dimmer <255>
Strobe <255>
Red <255>
Green <255>
Blue <255>
White <255>
Blue <100>
Lavender <100>
Mauve <100>
Magenta <100>
Pink <100>
Warm White <100>
White <100>
Cold White <100>
000
–
Mode
Static
255
001
–
Mode
Colour Macro
100
21