Cameo ZENIT B200 Bedienungsanleitung Seite 27

System Info
Firmware = Displays device
Temperature = Displays tem-
Operation Hours = Displays operat-
MANUAL LOCKING FUNCTION
In addition to the ability to protect the lamp automatically from accidental and unauthorised opera-
tion (see „Settings" - „Auto-lock"), the controls can also be locked manually. Press and hold the UP
and DOWN controls simultaneously for approximately 5 seconds. If an attempt is made to change
settings, „Locked!" will appear in the display and changing the lamp's settings via the controls is
no longer possible. After approx. 1 minute, the current operating mode is displayed again. To unlock,
press and hold the UP and DOWN controls simultaneously for approximately 5 seconds.
The display will show the previously displayed information.
Main
firmware CPU
LED
driver
LED
perature of LED
Unit
unit
xx:xx h
ing time
Vx.xx
Vx.xx
xx°C / xx°F
°C (= display in degrees Celsius)
°F (= display in degrees Fahrenheit)
Displays total operating time in hours and
minutes
27