tell Gate Control PRO 4G.IN4.R2 Inbetriebsetzung Seite 9

Gate Control PRO – 4G/2G/WiFi Quick Guide
Registering over the Internet:
Direct registration
What you will need:
- An App registration password for direct app registration must be configured
in the Mobile
For this, click on the QR code
registration tab, and configure the password necessary for direct registration
in the App registration password field. You will also need the QR code
shown under the same tab. Finally click on the Close button and write the
changes into the device using the Write users
- Make sure that the Cloud usage option is enabled in the General device
settings menu.
Registration steps:
- Open the mobile app and go to the main menu
- Choose the Add new device
- Tap on the Scan QR code
- Open the Mobile device menu in the programming software, click on the
QR code button, and then select the QR code for direct app registration
tab.
- Return to the mobile app and read the QR code used for direct app registration
with your mobile device.
- Enter your Username and Phone number.
- Enter the app registration Password configured in the programming software.
- Tap on the Next button.
- The device will be added automatically on the main screen.
How do other users register
Users can register by direct registration as described above, or by registration
with admin approval.
devices menu,
button, select the QR code for direct app
option.
button.
9
in the programming
button.
.
software.