HP HD Pro 2 Einführende Informationen Seite 6

There is any mechanical or enclosure damage.
●
During a thunderstorm.
●
During a power failure.
●
The power cord or plug is damaged.
●
The scanner has been dropped.
●
The scanner is not operating normally.
●
Scanner software
The scanner software is installed in the scanner's panel-PC touchscreen, and runs
automatically when you switch on the touchscreen.
The first screen that you see is divided into three main sections:
The viewing section on the left, for previewing scanned images; with nine
●
buttons above it that can be used to change the preview
The control section on the right, with four tabs containing options for Copy,
●
Scan, Print, and Setup tasks
The toolbar on the bottom, with nine buttons that are described below
●
Toolbar buttons
Button
4 Chapter 1 HP SD/HD Pro 2 44-in Scanner Introductory Information
Description
The Quit button shuts down the touchscreen.