Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.
Gently wipe the glass plate and the entire scanning area, including the main
cover and the roller, with a lint-free cloth dampened with a mild, streak-free,
glass cleaner.
Do not use abrasives, acetone, benzene, or fluids that contain these
chemicals. Do not spray liquids directly onto the scanner's glass plate or
anywhere else in the scanner.
6.
Dry the glass completely using a separate clean, dry, lint-free cloth such as
the one provided with the maintenance kit.
7.
Turn on the scanner.
8.
Select the Setup tab, then Options > Scanning > Calibrate.
9.
The Calibration Wizard guides you through the procedures of scanner
alignment, stitching, and calibration. To calibrate the scanner, you need the
maintenance sheet that came with your scanner.
Software error messages
A warning message may appear on the touchscreen, advising you to perform
maintenance.
Such a message may appear in the following circumstances:
Scanner maintenance has not been performed within the last 30 days.
●
The condition of the glass plate has deteriorated beyond an acceptable level.
●
The condition of the original background has deteriorated beyond an
●
acceptable level.
If you see any of these warnings displayed on the touchscreen, consult the user
guide for information on recommended maintenance procedures.
Software error messages
11
Werbung
