HP HD Pro 2 Einführende Informationen Seite 5

Do not place heavy objects on the power cord; do not bend the cables or force
●
them into contorted positions.
Insert the power cord securely and completely into the wall socket and
●
scanner inlet. A poor connection can cause a fire or an electric shock hazard.
Do not handle the power cord with wet hands. Doing so may cause an electric
●
shock.
Observe all warnings and instructions marked on the product.
●
Scanner operation
Precautions relating to the use of the scanner.
Do not allow metal or liquids (except those used in HP cleaning kits) to touch
●
the internal parts of the scanner. Doing so may cause fire, electric shock, or
other serious hazards.
Be careful while the scanner lid is open. Your fingers or hand may be trapped
●
or crushed.
Unplug the product from the wall before cleaning.
●
Scanner servicing
Precautions relating to repair operations.
There are no operator-serviceable parts inside the scanner
●
except those covered by HP's Customer Self-Repair program (see
http://www.hp.com/go/selfrepair). Refer servicing of other parts to qualified
service personnel.
Do not disassemble or repair the scanner yourself. There are hazardous
●
voltages inside the scanner that can cause a fire or electric shock.
Response to events
Turn off the scanner and unplug the power cord from the power outlet in any of the
following cases.
There is smoke or an unusual smell coming from the scanner.
●
The scanner is making an unusual noise not heard during normal operation.
●
A piece of metal or a liquid (not part of cleaning and maintenance routines)
●
touches internal parts of the scanner.
Response to events 3